DENALI Auxiliary Light Mount for R1250GS Adventure 19-

DENALI DL6 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY

LEDs: Cree XPL HI (8W each)
Power: 48W | 96W
Current Draw: 4A | 8A
Raw Lumens: 5,100 | 10,200
Beam Distance: 305m (1000') | 406m (1330')
Beam Width: 62m (203') | 82m (270')
Connector: DataDim compatible, 3-wire DT connector
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Dimensions: 3" x 4.5" rectangle x 2" deep
Pod Weight: 680g | 1.36kg
IP Rating: IP68 & 69K – Waterproof and resistant to high-pressure spray
Beam Certification: ECE R149 – Driving beam (auxiliary high beam)
EMC: Compliant with R10, CISPR 25, CE, UKCA

Homologated clear lens – Amber or yellow lens for off-road use only

Choose the color of the lens

1 Unit

Wiring and switch are required.

DENALI 50mm-60mm Tube Mount Kit For Mounting Auxiliary Lights

DENALI 2.0 DataDim Dual-Intensity Controller

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

DENALI CANsmart Light Connector for Denali 2.0 for R1200 LC & R1250 Series - GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

DENALI D4 LED Light Pod with DataDim™ Technology

1 Unit

• LED’s: (4x) 10 Watt Cree XPL HI 
• Power Draw: 3.3 Amps 
• Raw Lumens: 4380 
• DataDim™ Compatible: Yes 
• Operating Voltage: 12 VDC 
• Pod Size: 3.9” Square x 2.6” Deep 
• Pod Weight: 1.55 lbs
• IP67 Waterproof & Submersible 
• E Mark Approved Spot Lens 

RIZOMA Auxiliary Led Lights.

Kit Includes:

• 25,4 - 30mm diameter mounting clamps
• 2 supports for plane surface
• Wires and the switch botton to be fixed to the handlebars that easily allow to turn on and off the lights

DENALI DrySeal HI-LOW-OFF Switch

DENALI Wiring Harness Kit for Driving Lights - Standard Powersports

Standard Wiring Harness with surface-mount waterproof switch
Single-Intensity Relay 
Adhesive Pad 

DENALI Switch Eliminator Plug

Switch Eliminator plug replaces the standard On-Off switch so your lights will automatically power on and off with the vehicle's ignition. Enjoy the convenience of having your lights on any time your bike is running and peace of mind knowing they will turn off with the ignition

DENALI Wiring Harness Kit for Driving Lights

Switch aind Wiring Kit

DENALI 21mm-29mm Tube Mount Kit For Mounting Auxiliary Lights

Mount Kit For Mounting Auxiliary Lights To Crash Bars (Pair)

Black

DENALI BMW OEM Light Mount Adapter

This BMW OEM Light Mount Adapter allows you to mount any DENALI driving light to the original factory light mount. 

DENALI Driving Light Mount - Fender, M5 & M6 Bolts

Kit with multiple bushings and bolts for mounting DENALI DM, D2, D3, or S4 headlights on the front fender mounting bolts

DENALI 2.0 D3 Fog Light Pod

Pod Size: 3.5" (90mm) Round x 3.0" (76mm) Deep

LED: (4x) 11 Watt Cree XP-P LEDs 

Power Draw: 40 Watts (3.3 Amps)

Lumens: 2800

DataDim™ Compatible: Yes 

Operating Voltage: 9-32V DC 

IP67 Waterproof & Submersible

1 Unit

DENALI Auxiliary Light Mount For CRF1000L AFRICA TWIN 16-

Allows fitment of any DENALI LED light kit

Compatible with most brands of auxiliary lights