DENALI D7 Pod — High-Intensity Auxiliary Light

RIZOMA Auxiliary Led Lights.

Kit Includes:

• 25,4 - 30mm diameter mounting clamps
• 2 supports for plane surface
• Wires and the switch botton to be fixed to the handlebars that easily allow to turn on and off the lights

DENALI TriOptic™ Lens Kit for D4 LED Lights

Yellow or orange

GIVI TREKKER LED Projectors

• LED technology ensuring low energy consumption.
• Easily installable on all  engine guards with a tubular diameter of between 21 and 25 mm.  
• Supplied with fuse and cables for direct battery connection, as well as a waterproof switch for installing on the handlebar.
• Includes a third cable for connecting to the motorcycle ignition lock.

DENALI Wiring Harness Kit for Driving Lights - Standard Powersports

Standard Wiring Harness with surface-mount waterproof switch
Single-Intensity Relay 
Adhesive Pad 

DENALI 2.0 D2 TriOptic

Auxiliary light kit.

DENALI DL4 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY

LEDs: Cree XPL HI (8W each)
Watts: 32W
Amp Draw: 2.7A
Raw Lumens: 3,400
Beam Distance: 820' (250m)
Beam Width: 157' (48m)
Connector: DataDim Compatible 3-wire DT
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Size: 3" x 3" Square x 2" Deep
Pod Weight: 1.2 lbs
IP Rating: IP68 & 69K – Waterproof, Submersible & High-Pressure Spray Resistant
Beam Certification: ECE R149 – Driving Beam (Aux High Beam)
EMC: R10, CISPR 25, CE, UKCA Compliant

Homologated clear lens – Amber or yellow lens for off-road use only

Choose the color of the lens

1 Unit

Wiring and switch are required.

DENALI 2.0 DataDim Dual-Intensity Controller

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

DENALI DM LED Light Pod

• Cree LEDs, 2190 lumens per pair
• Multi-Beam TriOptic™ Lenses: Spot, Flood, Hybrid
• Pods with DataDim™ for plug and play and dimming
• Submersible DrySeal™ housings
• LiveActive™ Thermal Management
• Low profile mounting bracket
• Additional pair of flood lenses

1 Unit

GIVI LED Projectors

DENALI 2.0 DR1 TriOptic.

Auxiliary light kit.

LEDs: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 amps
Beam Distance (Spot): 1000 ft
Beam Width (Spot): 74 ft
Raw Lumens: 2190

Intensity: Single Intensity Harness
DataDim ™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.7in Round x 3.8in Deep

DENALI Driving Light Mount - Fender, M5 & M6 Bolts

Kit with multiple bushings and bolts for mounting DENALI DM, D2, D3, or S4 headlights on the front fender mounting bolts

DENALI 2.0 D3 TriOptic LED Driving Light Pod

1 Pod

• Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep
• LED: (3x) 11 Watt Cree XP-P LEDs 
• Power Draw: 36 Watts (3 Amps)
• Lumens: 2100
• DataDim™ Compatible: Yes 
• Operating Voltage: 9-32V DC 
• IP67 Waterproof & Submersible
• Hybrid Lens Certifications: SAE/DOT J581 & ECE R112
• Spot Lens Certifications: ECE R112 

DENALI CANsmart Light Connector for Denali 2.0 for R1200 LC & R1250 Series - GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

DENALI D7 PRO Pod - High-Intensity Auxiliary Light

11,900 lumens per pod — brightest light under 4.5" ever released

Cree XML3 14W LEDs with proprietary TIR optics

Independent dual-beam: center flood, outer spot, or hybrid all-on

Modular snap-on X-Lens (Clear, Amber, Selective Yellow)

DRL Boost Mode — use center LEDs as DRL or high-intensity flood

Integrated Turn Signal Mode — syncs with vehicle turn signals

CANsmart & DialDim compatible (20+ configurable features)

IP68/69K — waterproof, submersible & high-pressure spray resistant

E-Mark approved (ECE R112)

1 Unit — includes 3 X-Lenses and 2-into-1 wiring adapter

Wiring harness and switch required