DENALI DM LED Light Pod

DENALI TriOptic™ Lens Kit for D4 LED Lights

Yellow or orange

DENALI CANsmart Light Connector for Denali 2.0 for R1300GS 24- GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

RIZOMA Auxiliary Led Lights.

Kit Includes:

• 25,4 - 30mm diameter mounting clamps
• 2 supports for plane surface
• Wires and the switch botton to be fixed to the handlebars that easily allow to turn on and off the lights

DENALI 2.0 DataDim Dual-Intensity Controller

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

DENALI DL6 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY

LEDs: Cree XPL HI (8W each)
Power: 48W | 96W
Current Draw: 4A | 8A
Raw Lumens: 5,100 | 10,200
Beam Distance: 305m (1000') | 406m (1330')
Beam Width: 62m (203') | 82m (270')
Connector: DataDim compatible, 3-wire DT connector
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Dimensions: 3" x 4.5" rectangle x 2" deep
Pod Weight: 680g | 1.36kg
IP Rating: IP68 & 69K – Waterproof and resistant to high-pressure spray
Beam Certification: ECE R149 – Driving beam (auxiliary high beam)
EMC: Compliant with R10, CISPR 25, CE, UKCA

Homologated clear lens – Amber or yellow lens for off-road use only

Choose the color of the lens

1 Unit

Wiring and switch are required.

DENALI Switch Eliminator Plug

Switch Eliminator plug replaces the standard On-Off switch so your lights will automatically power on and off with the vehicle's ignition. Enjoy the convenience of having your lights on any time your bike is running and peace of mind knowing they will turn off with the ignition

DENALI 32mm-38mm Tube Mount Kit For Mounting Auxiliary Lights

Mount Kit For Mounting Auxiliary Lights To Frame, Fork & Crash Bars (Pair)

Black or Chrome

DENALI 50mm-60mm Tube Mount Kit For Mounting Auxiliary Lights

DENALI TriOptic™ Lens Kit for D3 LED Lights

Yellow or orange

DENALI D7 2.0 TriOptic

Auxiliary light kit

DENALI D4 LED Light Pod with DataDim™ Technology

1 Unit

• LED’s: (4x) 10 Watt Cree XPL HI 
• Power Draw: 3.3 Amps 
• Raw Lumens: 4380 
• DataDim™ Compatible: Yes 
• Operating Voltage: 12 VDC 
• Pod Size: 3.9” Square x 2.6” Deep 
• Pod Weight: 1.55 lbs
• IP67 Waterproof & Submersible 
• E Mark Approved Spot Lens 

DENALI Lens Kit for D7 LED Lights

Amber or Yellow

Pair

DENALI 2.0 D3 TriOptic LED Driving Light Pod

1 Pod

• Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep
• LED: (3x) 11 Watt Cree XP-P LEDs 
• Power Draw: 36 Watts (3 Amps)
• Lumens: 2100
• DataDim™ Compatible: Yes 
• Operating Voltage: 9-32V DC 
• IP67 Waterproof & Submersible
• Hybrid Lens Certifications: SAE/DOT J581 & ECE R112
• Spot Lens Certifications: ECE R112 

DENALI CANsmart Light Connector for Denali 2.0 for R1200 LC & R1250 Series - GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

DENALI 2.0 DR1 TriOptic.

Auxiliary light kit.

LEDs: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 amps
Beam Distance (Spot): 1000 ft
Beam Width (Spot): 74 ft
Raw Lumens: 2190

Intensity: Single Intensity Harness
DataDim ™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.7in Round x 3.8in Deep