DENALI 2.0 D2 TriOptic

Auxiliary light kit.

DENALI 2.0 D3 Fog Light Pod

Pod Size: 3.5" (90mm) Round x 3.0" (76mm) Deep

LED: (4x) 11 Watt Cree XP-P LEDs 

Power Draw: 40 Watts (3.3 Amps)

Lumens: 2800

DataDim™ Compatible: Yes 

Operating Voltage: 9-32V DC 

IP67 Waterproof & Submersible

1 Unit

DENALI 2.0 D3 TriOptic LED Driving Light Pod

1 Pod

• Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep
• LED: (3x) 11 Watt Cree XP-P LEDs 
• Power Draw: 36 Watts (3 Amps)
• Lumens: 2100
• DataDim™ Compatible: Yes 
• Operating Voltage: 9-32V DC 
• IP67 Waterproof & Submersible
• Hybrid Lens Certifications: SAE/DOT J581 & ECE R112
• Spot Lens Certifications: ECE R112 

DENALI 2.0 DataDim Dual-Intensity Controller

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

DENALI 2.0 DR1 TriOptic.

Auxiliary light kit.

LEDs: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 amps
Beam Distance (Spot): 1000 ft
Beam Width (Spot): 74 ft
Raw Lumens: 2190

Intensity: Single Intensity Harness
DataDim ™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.7in Round x 3.8in Deep

DENALI 21mm-29mm Tube Mount Kit For Mounting Auxiliary Lights

Mount Kit For Mounting Auxiliary Lights To Crash Bars (Pair)

Black

DENALI 32mm-38mm Tube Mount Kit For Mounting Auxiliary Lights

Mount Kit For Mounting Auxiliary Lights To Frame, Fork & Crash Bars (Pair)

Black or Chrome

DENALI 50mm-60mm Tube Mount Kit For Mounting Auxiliary Lights

DENALI Auxiliary Light Mount For CRF1000L AFRICA TWIN 16-

Allows fitment of any DENALI LED light kit

Compatible with most brands of auxiliary lights

DENALI Auxiliary Light Mount for R1250GS Adventure 19-

Allows fitment of any DENALI LED light kit

Compatible with most brands of auxiliary lights

DENALI BMW OEM Light Mount Adapter

This BMW OEM Light Mount Adapter allows you to mount any DENALI driving light to the original factory light mount. 

DENALI CANsmart Light Connector for Denali 2.0 for R1200 LC & R1250 Series - GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

DENALI CANsmart Light Connector for Denali 2.0 for R1300GS 24- GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

DENALI D4 LED Light Pod with DataDim™ Technology

1 Unit

• LED’s: (4x) 10 Watt Cree XPL HI 
• Power Draw: 3.3 Amps 
• Raw Lumens: 4380 
• DataDim™ Compatible: Yes 
• Operating Voltage: 12 VDC 
• Pod Size: 3.9” Square x 2.6” Deep 
• Pod Weight: 1.55 lbs
• IP67 Waterproof & Submersible 
• E Mark Approved Spot Lens 

DENALI D7 2.0 TriOptic

Auxiliary light kit

DENALI DL4 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY

LEDs: Cree XPL HI (8W each)
Watts: 32W
Amp Draw: 2.7A
Raw Lumens: 3,400
Beam Distance: 820' (250m)
Beam Width: 157' (48m)
Connector: DataDim Compatible 3-wire DT
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Size: 3" x 3" Square x 2" Deep
Pod Weight: 1.2 lbs
IP Rating: IP68 & 69K – Waterproof, Submersible & High-Pressure Spray Resistant
Beam Certification: ECE R149 – Driving Beam (Aux High Beam)
EMC: R10, CISPR 25, CE, UKCA Compliant

Homologated clear lens – Amber or yellow lens for off-road use only

Choose the color of the lens

1 Unit

Wiring and switch are required.

DENALI DL6 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY

LEDs: Cree XPL HI (8W each)
Power: 48W | 96W
Current Draw: 4A | 8A
Raw Lumens: 5,100 | 10,200
Beam Distance: 305m (1000') | 406m (1330')
Beam Width: 62m (203') | 82m (270')
Connector: DataDim compatible, 3-wire DT connector
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Dimensions: 3" x 4.5" rectangle x 2" deep
Pod Weight: 680g | 1.36kg
IP Rating: IP68 & 69K – Waterproof and resistant to high-pressure spray
Beam Certification: ECE R149 – Driving beam (auxiliary high beam)
EMC: Compliant with R10, CISPR 25, CE, UKCA

Homologated clear lens – Amber or yellow lens for off-road use only

Choose the color of the lens

1 Unit

Wiring and switch are required.

DENALI DM LED Light Pod

• Cree LEDs, 2190 lumens per pair
• Multi-Beam TriOptic™ Lenses: Spot, Flood, Hybrid
• Pods with DataDim™ for plug and play and dimming
• Submersible DrySeal™ housings
• LiveActive™ Thermal Management
• Low profile mounting bracket
• Additional pair of flood lenses

1 Unit

DENALI Driving Light Mount - Fender, M5 & M6 Bolts

Kit with multiple bushings and bolts for mounting DENALI DM, D2, D3, or S4 headlights on the front fender mounting bolts

DENALI DrySeal HI-LOW-OFF Switch

DENALI Lens Kit for D7 LED Lights

Amber or Yellow

Pair

 DENALI S4 2.0 TriOptic LED Light Kit

• High-Intensity Series Cree LEDs outputting 3066lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

1 Unit