DENALI S4 2.0 TriOptic LED Light

GIVI TREKKER LED Projectors

• LED technology ensuring low energy consumption.
• Easily installable on all  engine guards with a tubular diameter of between 21 and 25 mm.  
• Supplied with fuse and cables for direct battery connection, as well as a waterproof switch for installing on the handlebar.
• Includes a third cable for connecting to the motorcycle ignition lock.

DENALI 2.0 DataDim Dual-Intensity Controller

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

DENALI TriOptic™ Lens Kit for D4 LED Lights

Yellow or orange

DENALI 2.0 D2 TriOptic

Auxiliary light kit.

DENALI CANsmart Light Connector for Denali 2.0 for R1300GS 24- GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

DENALI 50mm-60mm Tube Mount Kit For Mounting Auxiliary Lights

DENALI DL4 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY

LEDs: Cree XPL HI (8W each)
Watts: 32W
Amp Draw: 2.7A
Raw Lumens: 3,400
Beam Distance: 820' (250m)
Beam Width: 157' (48m)
Connector: DataDim Compatible 3-wire DT
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Size: 3" x 3" Square x 2" Deep
Pod Weight: 1.2 lbs
IP Rating: IP68 & 69K – Waterproof, Submersible & High-Pressure Spray Resistant
Beam Certification: ECE R149 – Driving Beam (Aux High Beam)
EMC: R10, CISPR 25, CE, UKCA Compliant

Homologated clear lens – Amber or yellow lens for off-road use only

Choose the color of the lens

1 Unit

Wiring and switch are required.

DENALI DL2 Driving Light Pod with technology Datadim

Specifications (Single):

LED's: Cree XPL2 HD (8W each)

Watts: 16W

Amp Draw: 1.3A

Raw Lumens: 1,700

Beam Distance: 130' (40m)

Beam Width: 85' (26m)

Connector: DataDim Compatible 3-wire DT

Color Temperature: 6000K

Operating Voltage: 9-32 VDC

Pod Size: 2" x 3" Rectangle x 2" Deep

Pod Weight: 0.8 lbs

IP Rating: IP68 & 69K Waterproof Submersible & High-Pressure Spray

EMC: R10, CISPR 25, CE, UKCA Compliant

Homologated clear lens – Amber or yellow lens for off-road use only

Choose the color of the lens

1 Unit

Wiring and switch are required.

DENALI D7 2.0 TriOptic

Auxiliary light kit

DENALI 2.0 D3 Fog Light Pod

Pod Size: 3.5" (90mm) Round x 3.0" (76mm) Deep

LED: (4x) 11 Watt Cree XP-P LEDs 

Power Draw: 40 Watts (3.3 Amps)

Lumens: 2800

DataDim™ Compatible: Yes 

Operating Voltage: 9-32V DC 

IP67 Waterproof & Submersible

1 Unit

DENALI Auxiliary Light Mount for R1250GS Adventure 19-

Allows fitment of any DENALI LED light kit

Compatible with most brands of auxiliary lights

DENALI 21mm-29mm Tube Mount Kit For Mounting Auxiliary Lights

Mount Kit For Mounting Auxiliary Lights To Crash Bars (Pair)

Black

DENALI TriOptic™ Lens Kit for D3 LED Lights

Yellow or orange

DENALI 32mm-38mm Tube Mount Kit For Mounting Auxiliary Lights

Mount Kit For Mounting Auxiliary Lights To Frame, Fork & Crash Bars (Pair)

Black or Chrome

DENALI Lens Kit for D7 LED Lights

Amber or Yellow

Pair

DENALI CANsmart Light Connector for Denali 2.0 for R1200 LC & R1250 Series - GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.