DENALI D4 LED Light Pod with DataDim™ Technology

DENALI TriOptic™ Lens Kit for D3 LED Lights

Yellow or orange

DENALI 32mm-38mm Tube Mount Kit For Mounting Auxiliary Lights

Mount Kit For Mounting Auxiliary Lights To Frame, Fork & Crash Bars (Pair)

Black or Chrome

 DENALI S4 2.0 TriOptic LED Light Kit

• High-Intensity Series Cree LEDs outputting 3066lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

1 Unit

GIVI LED Projectors

DENALI 2.0 DR1 TriOptic.

Auxiliary light kit.

LEDs: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 amps
Beam Distance (Spot): 1000 ft
Beam Width (Spot): 74 ft
Raw Lumens: 2190

Intensity: Single Intensity Harness
DataDim ™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.7in Round x 3.8in Deep

DENALI 2.0 D3 Fog Light Pod

Pod Size: 3.5" (90mm) Round x 3.0" (76mm) Deep

LED: (4x) 11 Watt Cree XP-P LEDs 

Power Draw: 40 Watts (3.3 Amps)

Lumens: 2800

DataDim™ Compatible: Yes 

Operating Voltage: 9-32V DC 

IP67 Waterproof & Submersible

1 Unit

DENALI Wiring Harness Kit for Driving Lights - Standard Powersports

Standard Wiring Harness with surface-mount waterproof switch
Single-Intensity Relay 
Adhesive Pad 

DENALI TriOptic™ Lens Kit for D4 LED Lights

Yellow or orange

DENALI D7 PRO Pod - High-Intensity Auxiliary Light

11,900 lumens per pod — brightest light under 4.5" ever released

Cree XML3 14W LEDs with proprietary TIR optics

Independent dual-beam: center flood, outer spot, or hybrid all-on

Modular snap-on X-Lens (Clear, Amber, Selective Yellow)

DRL Boost Mode — use center LEDs as DRL or high-intensity flood

Integrated Turn Signal Mode — syncs with vehicle turn signals

CANsmart & DialDim compatible (20+ configurable features)

IP68/69K — waterproof, submersible & high-pressure spray resistant

E-Mark approved (ECE R112)

1 Unit — includes 3 X-Lenses and 2-into-1 wiring adapter

Wiring harness and switch required

DENALI DL4 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY

LEDs: Cree XPL HI (8W each)
Watts: 32W
Amp Draw: 2.7A
Raw Lumens: 3,400
Beam Distance: 820' (250m)
Beam Width: 157' (48m)
Connector: DataDim Compatible 3-wire DT
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Size: 3" x 3" Square x 2" Deep
Pod Weight: 1.2 lbs
IP Rating: IP68 & 69K – Waterproof, Submersible & High-Pressure Spray Resistant
Beam Certification: ECE R149 – Driving Beam (Aux High Beam)
EMC: R10, CISPR 25, CE, UKCA Compliant

Homologated clear lens – Amber or yellow lens for off-road use only

Choose the color of the lens

1 Unit

Wiring and switch are required.

DENALI D7 2.0 TriOptic

Auxiliary light kit

DENALI DrySeal HI-LOW-OFF Switch

DENALI Switch Eliminator Plug

Switch Eliminator plug replaces the standard On-Off switch so your lights will automatically power on and off with the vehicle's ignition. Enjoy the convenience of having your lights on any time your bike is running and peace of mind knowing they will turn off with the ignition

DENALI D7 Pod — High-Intensity Auxiliary Light

7,665 lumens per pod (15,330 lumens per pair)

Cree XPL HI 10W LEDs with up to 1,505 ft beam distance

DataDim™ compatible (plug-and-play + integrated dimming)

IP67 waterproof & submersible housing (DrySeal™)

LiveActive™ thermal management for consistent output

Interchangeable lenses: Clear, Amber and Selective Yellow

E-Mark approved

1 Unit

Wiring harness and switch required

RIZOMA Auxiliary Led Lights.

Kit Includes:

• 25,4 - 30mm diameter mounting clamps
• 2 supports for plane surface
• Wires and the switch botton to be fixed to the handlebars that easily allow to turn on and off the lights