DENALI Switch Eliminator Plug

DENALI Lens Kit for D7 LED Lights

Amber or Yellow

Pair

DENALI DL6 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY

LEDs: Cree XPL HI (8W each)
Power: 48W | 96W
Current Draw: 4A | 8A
Raw Lumens: 5,100 | 10,200
Beam Distance: 305m (1000') | 406m (1330')
Beam Width: 62m (203') | 82m (270')
Connector: DataDim compatible, 3-wire DT connector
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Dimensions: 3" x 4.5" rectangle x 2" deep
Pod Weight: 680g | 1.36kg
IP Rating: IP68 & 69K – Waterproof and resistant to high-pressure spray
Beam Certification: ECE R149 – Driving beam (auxiliary high beam)
EMC: Compliant with R10, CISPR 25, CE, UKCA

Choose the color of the lens

1 Unit

Wiring and switch are required.

DENALI DrySeal HI-LOW-OFF Switch

DENALI 2.0 D3 Fog Light Pod

Pod Size: 3.5" (90mm) Round x 3.0" (76mm) Deep

LED: (4x) 11 Watt Cree XP-P LEDs 

Power Draw: 40 Watts (3.3 Amps)

Lumens: 2800

DataDim™ Compatible: Yes 

Operating Voltage: 9-32V DC 

IP67 Waterproof & Submersible

1 Unit

DENALI 2.0 DR1 TriOptic.

Auxiliary light kit.

LEDs: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 amps
Beam Distance (Spot): 1000 ft
Beam Width (Spot): 74 ft
Raw Lumens: 2190

Intensity: Single Intensity Harness
DataDim ™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.7in Round x 3.8in Deep

DENALI 2.0 D3 TriOptic LED Driving Light Pod

1 Pod

• Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep
• LED: (3x) 11 Watt Cree XP-P LEDs 
• Power Draw: 36 Watts (3 Amps)
• Lumens: 2100
• DataDim™ Compatible: Yes 
• Operating Voltage: 9-32V DC 
• IP67 Waterproof & Submersible
• Hybrid Lens Certifications: SAE/DOT J581 & ECE R112
• Spot Lens Certifications: ECE R112 

DENALI CANsmart Light Connector for Denali 2.0 for R1200 LC & R1250 Series - GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

DENALI 2.0 D4 TriOptic

Auxiliary light kit.

DENALI CANsmart Light Connector for Denali 2.0 for R1300GS 24- GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

DENALI 2.0 DataDim Dual-Intensity Controller

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

DENALI DM LED Light Pod

• Cree LEDs, 2190 lumens per pair
• Multi-Beam TriOptic™ Lenses: Spot, Flood, Hybrid
• Pods with DataDim™ for plug and play and dimming
• Submersible DrySeal™ housings
• LiveActive™ Thermal Management
• Low profile mounting bracket
• Additional pair of flood lenses

1 Unit

GIVI TREKKER LED Projectors

• LED technology ensuring low energy consumption.
• Easily installable on all  engine guards with a tubular diameter of between 21 and 25 mm.  
• Supplied with fuse and cables for direct battery connection, as well as a waterproof switch for installing on the handlebar.
• Includes a third cable for connecting to the motorcycle ignition lock.

 DENALI S4 2.0 TriOptic LED Light Kit

• High-Intensity Series Cree LEDs outputting 3066lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

1 Unit