DENALI TriOptic™ Lens Kit for D3 LED Lights

DENALI Wiring Harness Kit for Driving Lights

Switch aind Wiring Kit

DENALI Lens Kit for D7 LED Lights

Amber or Yellow

Pair

DENALI CANsmart Light Connector for Denali 2.0 for R1300GS 24- GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

DENALI 2.0 D2 TriOptic

Auxiliary light kit.

DENALI Auxiliary Light Mount for R1250GS Adventure 19-

Allows fitment of any DENALI LED light kit

Compatible with most brands of auxiliary lights

 DENALI S4 2.0 TriOptic LED Light Kit

• High-Intensity Series Cree LEDs outputting 3066lumens per pod
• DrySeal™ Submersible Waterproof light can withstand the most extreme environments
• LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
• Low profile mounting bracket with stainless steel hardware included

1 Unit

DENALI D7 2.0 TriOptic

Auxiliary light kit

DENALI 32mm-38mm Tube Mount Kit For Mounting Auxiliary Lights

Mount Kit For Mounting Auxiliary Lights To Frame, Fork & Crash Bars (Pair)

Black or Chrome

DENALI 21mm-29mm Tube Mount Kit For Mounting Auxiliary Lights

Mount Kit For Mounting Auxiliary Lights To Crash Bars (Pair)

Black

DENALI 2.0 D3 TriOptic LED Driving Light Pod

1 Pod

• Pod Size: 3.5" (90mm) Round x 2.62" (66mm) Deep
• LED: (3x) 11 Watt Cree XP-P LEDs 
• Power Draw: 36 Watts (3 Amps)
• Lumens: 2100
• DataDim™ Compatible: Yes 
• Operating Voltage: 9-32V DC 
• IP67 Waterproof & Submersible
• Hybrid Lens Certifications: SAE/DOT J581 & ECE R112
• Spot Lens Certifications: ECE R112 

RIZOMA Auxiliary Led Lights.

Kit Includes:

• 25,4 - 30mm diameter mounting clamps
• 2 supports for plane surface
• Wires and the switch botton to be fixed to the handlebars that easily allow to turn on and off the lights

DENALI 2.0 DataDim Dual-Intensity Controller

This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.

DENALI 2.0 D4 TriOptic

Auxiliary light kit.

DENALI DL6 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY

LEDs: Cree XPL HI (8W each)
Power: 48W | 96W
Current Draw: 4A | 8A
Raw Lumens: 5,100 | 10,200
Beam Distance: 305m (1000') | 406m (1330')
Beam Width: 62m (203') | 82m (270')
Connector: DataDim compatible, 3-wire DT connector
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Dimensions: 3" x 4.5" rectangle x 2" deep
Pod Weight: 680g | 1.36kg
IP Rating: IP68 & 69K – Waterproof and resistant to high-pressure spray
Beam Certification: ECE R149 – Driving beam (auxiliary high beam)
EMC: Compliant with R10, CISPR 25, CE, UKCA

Choose the color of the lens

1 Unit

Wiring and switch are required.