Illustrative image. The product may show variations.
DENALI Lens Kit for D7 LED Lights
DENALI Lens Kit for D7 LED Lights
Amber or Yellow
Pair
DENALI DrySeal HI-LOW-OFF Switch
DENALI DrySeal HI-LOW-OFF Switch
DENALI Lens Kit for D7 LED Lights
Amber or Yellow
Pair
GIVI LED Projectors
DENALI DL6 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY
LEDs: Cree XPL HI (8W each)
Power: 48W | 96W
Current Draw: 4A | 8A
Raw Lumens: 5,100 | 10,200
Beam Distance: 305m (1000') | 406m (1330')
Beam Width: 62m (203') | 82m (270')
Connector: DataDim compatible, 3-wire DT connector
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Dimensions: 3" x 4.5" rectangle x 2" deep
Pod Weight: 680g | 1.36kg
IP Rating: IP68 & 69K – Waterproof and resistant to high-pressure spray
Beam Certification: ECE R149 – Driving beam (auxiliary high beam)
EMC: Compliant with R10, CISPR 25, CE, UKCA
Homologated clear lens – Amber or yellow lens for off-road use only
Choose the color of the lens
1 Unit
Wiring and switch are required.
DENALI D7 2.0 TriOptic
Auxiliary light kit
DENALI 2.0 DataDim Dual-Intensity Controller
This DENALI DataDim Dual-Intensity Controller enables the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch. All DENALI 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source.
RIZOMA Auxiliary Led Lights.
Kit Includes:
DENALI 2.0 D2 TriOptic
Auxiliary light kit.
LEDs: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 amps
Beam Distance (Spot): 525 ft
Beam Width (Spot): 75 ft
Raw Lumens: 2190
Intensity: Single Intensity Harness
DataDim™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 2.2in Round x 2.4in Deep
GIVI TREKKER LED Projectors
DENALI TriOptic™ Lens Kit for D3 LED Lights
Yellow or orange
DENALI S4 2.0 TriOptic LED Light Kit
1 Unit
DENALI Driving Light Mount - Fender, M5 & M6 Bolts
Kit with multiple bushings and bolts for mounting DENALI DM, D2, D3, or S4 headlights on the front fender mounting bolts
DENALI CANsmart Light Connector for Denali 2.0 for R1300GS 24- GEN 2
The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.
DENALI 50mm-60mm Tube Mount Kit For Mounting Auxiliary Lights
DENALI DL4 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY
LEDs: Cree XPL HI (8W each)
Watts: 32W
Amp Draw: 2.7A
Raw Lumens: 3,400
Beam Distance: 820' (250m)
Beam Width: 157' (48m)
Connector: DataDim Compatible 3-wire DT
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Size: 3" x 3" Square x 2" Deep
Pod Weight: 1.2 lbs
IP Rating: IP68 & 69K – Waterproof, Submersible & High-Pressure Spray Resistant
Beam Certification: ECE R149 – Driving Beam (Aux High Beam)
EMC: R10, CISPR 25, CE, UKCA Compliant
Homologated clear lens – Amber or yellow lens for off-road use only
Choose the color of the lens
1 Unit
Wiring and switch are required.
DENALI D7 PRO Pod - High-Intensity Auxiliary Light
11,900 lumens per pod — brightest light under 4.5" ever released
Cree XML3 14W LEDs with proprietary TIR optics
Independent dual-beam: center flood, outer spot, or hybrid all-on
Modular snap-on X-Lens (Clear, Amber, Selective Yellow)
DRL Boost Mode — use center LEDs as DRL or high-intensity flood
Integrated Turn Signal Mode — syncs with vehicle turn signals
CANsmart & DialDim compatible (20+ configurable features)
IP68/69K — waterproof, submersible & high-pressure spray resistant
E-Mark approved (ECE R112)
1 Unit — includes 3 X-Lenses and 2-into-1 wiring adapter
Wiring harness and switch required
DENALI TriOptic™ Lens Kit for D4 LED Lights
Yellow or orange