DENALI 39mm-49mm Tube Mount Kit For Mounting Auxiliary Lights

DENALI TriOptic™ Lens Kit for D4 LED Lights

Yellow or orange

DENALI 2.0 DR1 TriOptic.

Auxiliary light kit.

LEDs: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 amps
Beam Distance (Spot): 1000 ft
Beam Width (Spot): 74 ft
Raw Lumens: 2190

Intensity: Single Intensity Harness
DataDim ™ Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.7in Round x 3.8in Deep

DENALI Wiring Harness Kit for Driving Lights - Standard Powersports

Standard Wiring Harness with surface-mount waterproof switch
Single-Intensity Relay 
Adhesive Pad 

DENALI DM LED Light Pod

• Cree LEDs, 2190 lumens per pair
• Multi-Beam TriOptic™ Lenses: Spot, Flood, Hybrid
• Pods with DataDim™ for plug and play and dimming
• Submersible DrySeal™ housings
• LiveActive™ Thermal Management
• Low profile mounting bracket
• Additional pair of flood lenses

1 Unit

RIZOMA Auxiliary Led Lights.

Kit Includes:

• 25,4 - 30mm diameter mounting clamps
• 2 supports for plane surface
• Wires and the switch botton to be fixed to the handlebars that easily allow to turn on and off the lights

DENALI 32mm-38mm Tube Mount Kit For Mounting Auxiliary Lights

Mount Kit For Mounting Auxiliary Lights To Frame, Fork & Crash Bars (Pair)

Black or Chrome

DENALI BMW OEM Light Mount Adapter

This BMW OEM Light Mount Adapter allows you to mount any DENALI driving light to the original factory light mount. 

DENALI Auxiliary Light Mount For CRF1000L AFRICA TWIN 16-

Allows fitment of any DENALI LED light kit

Compatible with most brands of auxiliary lights

DENALI Auxiliary Light Mount for R1250GS Adventure 19-

Allows fitment of any DENALI LED light kit

Compatible with most brands of auxiliary lights

DENALI D4 LED Light Pod with DataDim™ Technology

1 Unit

• LED’s: (4x) 10 Watt Cree XPL HI 
• Power Draw: 3.3 Amps 
• Raw Lumens: 4380 
• DataDim™ Compatible: Yes 
• Operating Voltage: 12 VDC 
• Pod Size: 3.9” Square x 2.6” Deep 
• Pod Weight: 1.55 lbs
• IP67 Waterproof & Submersible 
• E Mark Approved Spot Lens 

DENALI DL4 DRIVING LIGHT PODS W/ DATADIM TECHNOLOGY

LEDs: Cree XPL HI (8W each)
Watts: 32W
Amp Draw: 2.7A
Raw Lumens: 3,400
Beam Distance: 820' (250m)
Beam Width: 157' (48m)
Connector: DataDim Compatible 3-wire DT
Color Temperature: 6000K
Operating Voltage: 9–32 VDC
Pod Size: 3" x 3" Square x 2" Deep
Pod Weight: 1.2 lbs
IP Rating: IP68 & 69K – Waterproof, Submersible & High-Pressure Spray Resistant
Beam Certification: ECE R149 – Driving Beam (Aux High Beam)
EMC: R10, CISPR 25, CE, UKCA Compliant

Homologated clear lens – Amber or yellow lens for off-road use only

Choose the color of the lens

1 Unit

Wiring and switch are required.

DENALI CANsmart Light Connector for Denali 2.0 for R1200 LC & R1250 Series - GEN 2

The DENALI CANsmart™ Controller provides plug-n-play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software.

DENALI 2.0 D2 TriOptic

Auxiliary light kit.

DENALI Wiring Harness Kit for Driving Lights

Switch aind Wiring Kit

DENALI Switch Eliminator Plug

Switch Eliminator plug replaces the standard On-Off switch so your lights will automatically power on and off with the vehicle's ignition. Enjoy the convenience of having your lights on any time your bike is running and peace of mind knowing they will turn off with the ignition