Set of two connections

RIZOMA UNIT Indicators Mounting Kit

A kit contains 2 pcs. These adapters are made of EPDM with stainless steel threaded screw.

Thread: M8x1,25

Compatible with Rizoma LIGHT UNIT turn signals and Rizoma mounting kits only.

Warning: avoid the installation too close the exhaust system because heat sources could damage the EPDM shell.

The kit includes 3 spacers to allow fitment to fork tubes with outside diameters of 39/41/43mm. 1pc only

LIGHTECH LED Indicators Adapters

For 2 Indicators

RIZOMA Adapters for LED Indicators Lights

RIZOMA Mounting kit for Mirror/Turn Light

Mounting kit for combining Sguardo turn signals with bar-end mirrors

In combination with Rizoma End Mount mirrors Spy-Arm, Lunar and in combination with Rizoma Bar Mount mirrors Reverse Retro, Reverse Radial, Eccentrico, Cut Edge.

Compatible with handlebars with an external diameter of 22 mm and an internal diameter of 13.5 - 18 mm.

1 Unit

RIZOMA Indicator relay kit for LED turn signals

When fitting all four Rizoma turn signals, our technicians recommend replacing the OEM relay with our product EE031.

This allows maintaining the correct flash frequency as with the original device, albeit with a different wattage.

With use of the EE031 relay, there is no need to use the resistors included in the kit.

RIZOMA UNIT Indicators Mounting Kit

Applied using an M5 screw

Pair

RIZOMA UNIT Indicators Mounting Kit

The kit consists of two aluminum brackets that act as turn signal supports and that, through 3M double-sided tape, can be fixed directly to the fairing. The turn signals are secured to the brackets by anodized aluminum clamping nuts, included in the kit.

Pair

Indicator Mounting Adapters for Kawasaki ER-6 12-16, Z250SL, Z300, Z650, Z800, Z900, Z1000 14-, Ninja 250SL/300/650, Z1000 SX, ZX-10R 16-

RIZOMA Indicators Adapter kit

For 2 indicators

RIZOMA UNIT Indicators Mounting Kit

Applied using an M5 screw

Pair

RIZOMA Adapters for LED Indicators Lights

RIZOMA Mounting kit for Mirror/Turn Light

Mounting kit for combining Sguardo turn signals with bar-end mirrors

In combination with Rizoma End Mount mirrors Spy-Arm, Lunar and in combination with Rizoma Bar Mount mirrors Reverse Retro, Reverse Radial, Eccentrico, Cut Edge.

Compatible with handlebars with an external diameter of 25.4 mm and an internal diameter of 21 - 23 mm.

1 Unit