RIZOMA Indicators Adapter kit

RIZOMA Wiring kits for indicators

Pair of wiring

RIZOMA UNIT Indicators Mounting Kit

The kit consists of two aluminum brackets that act as turn signal supports and that, through 3M double-sided tape, can be fixed directly to the fairing. The turn signals are secured to the brackets by anodized aluminum clamping nuts, included in the kit.

Pair

RIZOMA Mounting kit for Mirror/Turn Light

Mounting kit for combining Sguardo turn signals with bar-end mirrors

In combination with Rizoma End Mount mirrors Spy-Arm, Lunar and in combination with Rizoma Bar Mount mirrors Reverse Retro, Reverse Radial, Eccentrico, Cut Edge.

Compatible with handlebars with an external diameter of 25.4 mm and an internal diameter of 21 - 23 mm.

1 Unit

RIZOMA Mounting kit for Mirror/Turn Light

Mounting kit for combining Sguardo turn signals with bar-end mirrors

In combination with Rizoma End Mount mirrors Spy-Arm, Lunar and in combination with Rizoma Bar Mount mirrors Reverse Retro, Reverse Radial, Eccentrico, Cut Edge.

Compatible with handlebars with an external diameter of 22 mm and an internal diameter of 13.5 - 18 mm.

1 Unit

RIZOMA UNIT Indicators Mounting Kit

One kit contains 2 pieces. These adapters are made of Anticorodal 100.

Internal diameter: 20 mm.

Compatible with Rizoma LIGHT UNIT turn signals only.

Caution: FR443B cannot be installed in combination with Rizoma DYNAMIC mirrors (BS080).

RIZOMA UNIT Indicators Mounting Kit

A kit contains 2 pcs. These adapters are made of EPDM with stainless steel threaded screw.

Thread: M8x1,25

Compatible with Rizoma LIGHT UNIT turn signals and Rizoma mounting kits only.

Warning: avoid the installation too close the exhaust system because heat sources could damage the EPDM shell.

RIZOMA Adapters for LED Indicators Lights

RIZOMA Adapters for LED Indicators Lights

4 Pieces.

Each Indicator Light uses 2 pieces

RIZOMA Adapters for LED Indicators Lights

RIZOMA Adapters for LED Indicators Lights

RIZOMA Adapters for LED Indicators Lights

RIZOMA Leggera Indicators Mounting Kit for PANIGALE V4

Applied using an M5 screw

Pair

RIZOMA Indicator Light Spacer

1 Unit

The kit includes 3 spacers to allow fitment to fork tubes with outside diameters of 39/41/43mm. 1pc only

RIZOMA Indicator relay kit for LED turn signals

When fitting all four Rizoma turn signals, our technicians recommend replacing the OEM relay with our product EE031.

This allows maintaining the correct flash frequency as with the original device, albeit with a different wattage.

With use of the EE031 relay, there is no need to use the resistors included in the kit.