R&G Headlight Shield for GSX-R 1000 09-16
R&G Headlight Shield for GSX-R 1000 09-16
Made from 2.5mm or thicker, clear, scratch-resistant acrylic
Comes with transparent 3M™ Dual Lock™ pads for easy installation
YOSHIMURA Camshaft Set "Type-R" for GSX-R 1000 09-16
MAX LIFT(mm) | IN 10.10mm/EX 8.80mm |
1mm DURATION(°) | IN 258°/EX 250° |
Standard Tappet Clearance(mm) | IN 0.13mm/EX 0.15mm |
YOSHIMURA Camshaft Set "Type-R" for GSX-R 1000 09-16
MAX LIFT(mm) | IN 10.10mm/EX 8.80mm |
1mm DURATION(°) | IN 258°/EX 250° |
Standard Tappet Clearance(mm) | IN 0.13mm/EX 0.15mm |
R&G Headlight Shield for GSX-R 1000 09-16
Made from 2.5mm or thicker, clear, scratch-resistant acrylic
Comes with transparent 3M™ Dual Lock™ pads for easy installation
OZ MOTORBIKE GASS RS-A Wheels Kit.
HEALTECH iQSE Quickshifter Easy Kit for Suzuki
Kit includes Module, Sensor and Harness
R&G Cotton Reels for Suzuki GSX-R1000 07-/ GSX-S1000 15-/GSX-S950 21-
RENTHAL Rear Sprocket 210U-520-44P-HA ULTRALIGHT
ALIANT Lithium battery YLP14.
Equivalent to:
BREMBO SERIE ORO Floating Disc Kit (Front).
BREMBO T-Drive Floating Disc Kit (Front).
MIVV Catalytic Converter for Suzuki GSX-R 1000 09-11
Homologated
BREMBO Pads Kit (Rear).
This is a sintered compound, specific for rear application, is characterised by a consistently high friction coefficient in all conditions of use, both hot and cold, combined with low wear which ensures long life and adequate mileage.
LIGHTECH License plate support for GSX-R 1000 09-16
License plate support, license plate support light, reflector kit.
YOSHIMURA Camshaft Set "ST-R TYPE-S" for GSX-R 1000 09-11
Type | ST-R TYPE-S |
MAX LIFT(mm) | IN 9.55mm/EX 8.72mm |
1mm DURATION(°) | IN 260°/EX 254° |
Standard Tappet Clearance(mm) | IN 0.13mm/EX 0.15mm |
BREMBO SERIE ORO Brake Disc (Rear).
Please note: This product requires the swing arm to be drilled and tapped to allow fitment, full fitting instructions are provided with the product.
OZ MOTORBIKE PIEGA R Wheels Kit.
Wheels Kit with 5 Spokes in forged aluminium.
BRAKING EPTA STAGE 0 Brake Disk Kit (Front)
Thickness 5,8 mm
Optimized lightening holes to avoid vibration
Machined grooves in the brake track for greater heat dissipation, resulting in a temperature drop of up to 40°C
Rotor in Stainless Steel and center in Aluminium connected with EPTA technology
Ø 310mm